Archives

• MR International Journal of Engineering and Technology

  Vol. 10 No. 1 (2023)

   

  Articles:

  1. Comparative Analysis of Conventional Steel and Composite Drive Shaft

  2. Feedback System using ESP8266

  3. Intuitionistic Trapezoidal Fuzzy based Aggregation Operator

  4. Load Balancing Algorithms with the application of Machine Learning: A Review

  5. NETRAM - AI Driven Technology

  6. OralMate: Intelligent Brushing Monitoring Using a Smart Toothbrush

  7. Vajra Kaksh: Stay Safe from Virus

  8. Water Quality Prediction Using Machine Learning

• MR International Journal of Engineering and Technology

  Vol. 9 No. 2 (2017)

   

  Articles:

  1. Airplane crash investigations: A Changing Era in Cyber Security

  2. Energetic Ion Irradiation and Annealing Effect on Ti/Co System

  3. To Develop a Management Practice model Combining Indian and Japanese Management Model

  4. Comparative Performance Analysis of Connecting Rod using two Distinct Composite Materials by F.E.A.

  5. Design Approach and Fabrication of Prototype Centrifuge

  6. Cyber Warriors: Tradeoffs Between Attack and Defense of Information System

  7. Aircraft Maintenance Philosophy

   

• MR International Journal of Engineering and Technology

  Vol. 9 No. 1 (2017)

  Articles:

  1. Comparative Analysis of D Flip Flop using various Submicron Technologies

  2. Knowledge System in Development of Energy Technology

  3. Stability Criteria of Kapur’s Entropy under the Deformed Specification of Exponential Distribution

  4. Role of Media and Management Towards Sustainability

  5. A Compact Micro Strip-Fed UWB Antenna with Double Band Rejection Using SIR

  6. Review on Biometric Identification Using Lip Prints

  7. A Review Paper on Deadlock Detection in Distributed System

  8. Passenger Seat Vibration Control in Active Quarter Car Model Using Bat Algorithm Based PID Controller

   

• MR International Journal of Engineering and Technology

  Vol. 8 No. 2 (2016)

   

  Articles:

  1. Mobile Ad-HOcMEsh Network (MAHOMEN) in Remote Areas: An Innovative Case Study

  2. Wearable Technology: Overview and It’s Market Assessment

  3. iPiBo: Medicine Reminder Device for Illiterate Patients

  4. A Systematic Study of Hunting Bugs

  5. A Study of Frequent Item Set Mining Techniques

  6. Study and Analysis of Web Application Firewall Blacklist Evasion

  7. Algorithms for Tracking of Maximum Power Point in Solar Energy System

  8. Use of Locality Sensitive Hashing in Query by Humming Method of Audio Signal

   

• MR International Journal of Engineering and Technology

  Vol. 8 No. 1 (2016)

   

  Articles:

  1. Performance Analysis of Diesel Engine on Variable Compression Ratio

  2. Iris Signature Methodology for Securing MANET

  3. Optimization of Job Shop Scheduling with Transportation Time Using Genetic Algorithm

  4. Bi-orthogonal Wavelet Based Comer Template Encoding Methodology

  5. Service Evolution: A Literature Survey

  6. Evaluation of Software Consistency for Component Based System Through Soft Computing Technique

  7. Analysis of Detection of Atherosclerosis Using Marker Controlled Watershed Modified Segmentation Altorithm

  8. Comparative Study and Implementation of Vedic Multiplier for Reversible Logic Based ALU

  9. Investigations on the Role of Distribution Static Compensator in Distribution Networks Under Fault Condition

  10. Generation of Electricity with the Use of Speed Breakers

   

• MR International Journal of Engineering and Technology

  Vol. 7 No. 2 (2015)

   

  Articles:

  1. Analysis and Mitigation of SubSynchronous Resonance in Power System with SVC and Using BFO Based Optimal Controller

  2. Power Quality Improvement Using Isolated CUK Converter for PMBLDCM Drive

  3. Modelling a Batch Production System through Tecnomatix: A Case Study

  4. Comparative Analysis of Hysteresis and PWM Current Controllers for PMSM Drive

  5. Design and Simulation of Boost Converter for SPV Fed Water Pumping System

  6. Ant Colony Optimization: A Tutorial Review

  7. A Review on Performance Improvement and Power Optimization in Cooperative FSO Networks

  8. Plant: A Natural Purifier of Environment

  9. Active Solar Still

  10. Monopole Flexible Antenna for Wi-Fi and 4G Long Term Evolution Applications

• MR International Journal of Engineering and Technology

  Vol. 7 No. 1 (2015)

   

  Articles:

  1. Stress Generation Techniques in Advanced CMOS

  2. Face Recognition Using PCA Based Eigenfaces

  3. Applications of Advanced Ceramics and Ceramic Matrix Composites: A Perspective

  4. Text Summarization Using Semantic Analysis of Frequent Terms

  5. Manufacturing System Selection Using FuzzyAHP

  6. Scheduling Exploiting Frequency and Multi-User Diversity in LTE Downlink Systems with Heterogeneous Mobilities

  7. Structural and Thermal Analysis of a C.I. Engine Piston of Different Materials Using FEM Technique

  8. Cooperative Intrusion Detection Technique Against Blackhole and DoS Attacks in MANET

   

• MR International Journal of Engineering and Technology

  Vol. 6 No. 2 (2014)

   

  Articles:

  1. Increments in Gauge Length of Extensometer with Low Cost Approach : A Case Study

  2. Evaluation of Realistic and Exact Three Dimensional Finite Element Stresses for Large Excavation

  3. Lean Manufacturing and Environment

  4. Hybrid Fuzzy-PID Control of a Semi-Active Quarter Car System

  5. Booth Modified RNS Multiplier in RNS to Binary Code Converator Using {2P+1 2P, 2p-1}

  6. Prediction of Temperature Distribution on Tool in Orthogonal Turning of Inconel 718

  7. Mycotoxins: A Review of Toxicity, Metabolism and Biological Approaches to Counteract the Production in Food

  8. Transformers Fault Detection Using Artificial Intelligence Technique

  9. A Review of PAPR Reduction Techniques for OFDM Systems

  10. Optimization of Job Shop Scheduling Using Genetic Algorithm

   

• MR International Journal of Engineering and Technology

  Vol. 6 No. 1 (2014)

   

  Articles:

  1. Investigation of DMW Joints Using Buttering Deposits Prepared with Paste Technique

  2. Study of Human Joint Under Highly Loaded Conditions: Effect of Exponential Slider Bearing

  3. Development of a Generic and Simplified Mathematical Model of a Building Space in MATLAB/ Simulink

  4. Digital Signal Processing Using High Speed Low Power Tolerant Adder

  5. Metallurgical Characterization of Buttering Deposits

  6. Design and Analysis of Motorbike Connecting Rod by FEM

  7. Cost Effective Service Broker Strategy in Selection of Data Centers in Cloud Computing

  8. Evolution of Contact Models for Different Types of Contacts

   

• MR International Journal of Engineering and Technology

  Vol. 10 No. 2 (2023)

• MR International Journal of Engineering and Technology

  Vol. 5 No. 2 (2013)

   

  Articles:

  1. Design Methodologies for Radio Frequency Low Noise Amplifier for IEEE Standards under IEEE 802.11 b/g and IEEE 802.15

  2. Granular Computing Approach for Handling Uncertainty in Optimization Problems

  3. Deformation in Transversely Isotropic Thermoelastic Material Without Energy Dissipation and With Two Temperature due to Inclined Load

  4. Comparative Analysis of Various Approaches for Semantic Information Retrieval

  5. Total Domination Number of Cartesian Product of Cycles Cm Cn For m = 6, 7

  6. Change Point Method with Weibull Distribution

  7. A note on Chang’s and Lowen’s Fuzzy Topology

• MR International Journal of Engineering and Technology

  Vol. 5 No. 1 (2013)

   

  Articles:

  1. Optimal-Ant Colony Optimization in Swarm Intelligence

  2. Biodiesel From Algae

  3. Behaviour of Reinforced High Performance Concrete Filled UPVC Columns

  4. Symmetrical Analysis of Bio Mass Gasification Techniques

  5. Quality Management in Private Technical Educational Institutions with a Special Reference to Infrastructure

  6. Design of Efficient K-Means Clustering Algorithm with Improved Initial Centroids

  7. Systematic Fact Finding and Problem Solving for Leakage in High Pressure Line in Diesel Engine

  8. Coordinated Design of TCSC and PSS for Mitigating Inter-Area Oscillation

   

• MR International Journal of Engineering and Technology

  Vol. 4 No. 2 (2012)

   

  Articles:

  1. Analysis of k-out-of-n Redundant Reliability Systems with Multiple Constraints

  2. Development of Community Sewage Treatment System Consisting of UASB and the Third Generation DHS (Down Flow Hanging Sponge) Reactor for Developing Countries

  3. A Fuzzy Model for the Estimation of Passenger Car Unit for Light Commercial Vehicles

  4. Temperature Effect on Flexible Pavement Responses

  5. FEM Analysis of Copper Using Equal Channel Angular Pressing

  6. Solar Energy Future in India

  7. Deadlock Detection Techniques in Distributed Database System

   

• MR International Journal of Engineering and Technology

  Vol. 4 No. 1 (2012)

   

  Articles:

  1. Adaptive-PID with Sliding Mode Control for Longitudinal Flight of an UAV

  2. Analysis of Limit Cycle Stability and Control for Nonlinear Systems

  3. Comparative Performance in Load Frequency Stabilization by Coordinated Control with SMES and without SMES for a Bilateral Two area Thermal - Thermal System

  4. Analysis of the Intricacies Involved in Imparting Soft Skills Training to Undergraduate Engineering Students in India

  5. New Paradigm in Machining

  6. Optimization of IRM - Parallel-Series Redundant System

  7. Design and Analysis of Three Stages pHEMT - LNA at K-Band

• MR International Journal of Engineering and Technology

  Vol. 3 No. 2 (2011)

  Articles:

  1. Retailer's Optimal Credit and Replenishment Policy for Deteriorating Items Using A Flexible Credit Demand 

  2. Variable Speed AC Drives: The Past and Current Status  

  3. Stochastic Integrated Vendor-Buyer Model with Negative Exponential Crashing Cost

  4. Private Technical Education Institutions - A Quality Approach

  5. A Scheme to Design a Multiband Circularly Polarized Inverted L-Patch Antenna

  6. Fuzzy Goal Programming Approach for Optimal Media Selection in a Multi-Products Segmented Market

• MR International Journal of Engineering and Technology

  Vol. 3 No. 1 (2011)

   

  Articles:

  1. Stability Analysis of Thyristor Controlled Series Compensation Using Simulink

  2. Comparative Analysis of Various Locations of Compensation Devices Using CCT Assessment

  3. EHD Analysis of a Four-Lobe Pressure Dam Bearing with Rigid and Flexible Rotors

  4. Genetic Algorithm Technique for Improving Smart Antenna System

  5. Probiotics: Health Benefits and Side Effects

  6. A Proposed Method for Error Prediction and Compensation in Hard Turning

  7. Selection of Antenna for Wireless Communication System

  8. Flow Imaging around Bridge Abutments

• MR International Journal of Engineering and Technology

  Vol. 2 No. 2 (2010)

   

  Articles:

  1. Comparison of various Features of Dynamic Routing Algorithms

  2. Soft-Storey Damages in Multi-Storied Buildings: A Critical Review

  3. Seismic Response of R.C.C. Framed Buildings with Different Brace Patterns

  4. LabVIEW based Virtual Instrument to Acquire Real Time Signals for implementing Advanced Communication Techniques

  5. An Energy-efficient Routing Protocol for Homogeneous Wireless Sensor Networks

  6. Effect of Groove Angle on the Performance of a Four-Lobe Pressure Dam Bearing with Rigid and Flexible Rotors

  7. Role of Anti HB Core Anitbody Screening by Chemiluminescence in Facility with ID-NAT Testing

  8. Robust Adaptive Control of Robot Manipulator Using General Regression Neural Network

  9. Proline Relationship with Protein in Seedlings Under Induced Stress in the Presence of Putrescine

  10. Review: Evolution of Biomechanics in the Interest of Life Activities

• MR International Journal of Engineering and Technology

  Vol. 2 No. 1 (2010)

   

  Articles:

  1. FPGA based Digital System Design—Issues and Challenges

  2. Antagonistic Activity of Soil Fungal Metabolite Against Candida albicans

  3. A Metric for the Activeness of a Distributed Object-Oriented Component Library

  4. Coding, Evaluation and Selection of Gas Turbine Systems

  5. Microbial Circuits: A New Paradigm in Computing

  6. Auto Pilot for Car using Fuzzy Logic and Laser Scanning Radar Sensor

  7. Present Status and Impact of Joint Industry —Academia Evaluation on Graduate Engineering Students: An Indian Case Study

  8. Simulation Based Comparison of Routing Protocols for Mobile Ad hoc Network

  9. Track-etch membranes as tools for synthesizing nano-/micro-structures and devices

  10. Signal Processing for Heart Rate Variability: Part-II

• MR International Journal of Engineering and Technology

  Vol. 1 No. 2 (2009)

   

  Articles:

  1. Fuzzy Burst Round Robin Scheduling

  2. Design and Formal Specifications of an Intelligent and Adaptive Multi-agent Interface Using Z-Specification Language

  3. Towards Functional Method Engineering

  4. Indexing: The Most Vital Tool for Information Retrieval 

  5. Modelling Supplier Evaluation for an Automobile Company Using Analytical Hierarchy Process

  6. Exergy Analysis of a Co-generation Cycle for Combined Production of Power and Refrigeration

  7. Studies in End-loss Phenomena in Axial Flow Steam Turbine Blade Passages

  8. Effect of Load Orientation on the Performance of a Four-Lobe Bearing 

  9. Signal Processing for Heart Rate Variability: Part I 

  10. Space Vector Pulse Width Modulation (SVPWM) Implementation in Induction Motors Through Digitization of Algorithmic Designing 

  11. in-vitro Multiplication of psoralea corylifolia an Endangered Medicinal Plant 

  12. Measurement of Serum Glucose with Oxidase Immobilized onto Onion Membrane

   

• MR International Journal of Engineering and Technology

  Vol. 1 No. 1 (2009)

   

  Articles:

  1. Applicability of Fuzzy Logic in Clustering

  2. Merging Query Interfaces in Domain-Specific Hidden Web DataBases

  3. Performance Comparison of Two Reactive Routing Protocols for Ad Hoc Network

  4. Analysis of Soft Computing Technique to Minimiz the Local Minima Problem in Pattern Recognition for Hand Written English Alphabets

  5. A Model to Estimate Biodiesel Production Costs in India

  6. Fuelling a Small Capacity Diesel Engine with Ethyl Ester of Industrial Rice Bran Oil

  7. Preparation and Characterisation of Electrodeposited Cu (In, Ga) Se 2 Thin Film Solar Cells

  8. Dual Input Capp System for Rotational Components